Compound Miter the bevel and miter answer book
  • Home
  • Inside the Book
  • Using the Book's Pages
  • Behind the Book
  • About the Author
  • Contact the Author
  • Purchase
  • Blog
        A Complete Compound Miter Reference Book answering all Bevel Angle Saw Settings and Miter Angle Saw Settings through easy to use tables. To find any Bevel and Miter Angle Answer is as easy as locating within the Finding Bevel And Miter Angle tables a table titled after either a known Inside Corner Angle or a known Outside Corner Angle, then within that same table locate a known Spring Angle (the material’s angle), just below the Spring Angle are both: the Bevel Angle and Miter Angle Answers for Saw Settings. With Compound Miter the bevel and miter answer book being the Complete Compound Miter Reference Book, the book contains complete sets of tables for finding all the unknown entries for the Finding Bevel And Miter Angle tables as well such as unknown Inside Corner Angles, unknown Outside Corner Angles and unknown Spring Angles.
Compound Miter the bevel and miter answer book's Front CoverThe Book's Front Cover
Compound Miter the bevel and miter answer book, by Eddie Pinto 

All the Answers to:

Any Bevel Angle Saw Settings

All the Answers to: 

Any Miter Angle Saw Settings

(using the following formula within the Book's Tables)
I.C or O.C. with S.A = B.A. & M.A.

Using any Inside Corner Angle (1° thru 180°) with any
Outside Corner Angle (180° thru 360°) along with any
Spring Angle, (1° thru 90°) the material's angle for all
Bevel Angle Saw Settings and Miter Saw Settings.


Compound Miter the bevel and miter answer book's Rear CoverThe Book's Rear Cover
Tables Inside the Book

Finding Bevel And Miter Angles

Finding Inside And Outside Corner Angles


Finding Spring Angles


Finding Square-Cut Rafter's Spring Angles

Useful Tools Inside The Book

Cutting Crown Moldings Using A Single Bevel Miter Saw
Cutting Crown Moldings Using A Double Bevel Miter Saw
Cutting Compound Miters Using A Single Bevel Miter Saw
Cutting Compound Miters Using A Double Bevel Miter Saw
Converting Decimals To Fractions
Quick Tape-Measure Conversions

     Whether it being a Compound Miter Joint for a Crown Molding installations or a Compound Miter Joint for installations other than Crown Moldings, Compound Miter the bevel and miter answer book contains all the Answers to any Compound Miter Joint in question all within easy to use tables to find: Bevel and Miter Angles Inside and Outside Corner Angles Spring Angles and Square-Cut Rafter’s Spring Angles. As the Complete Compound Miter Reference Book, Compound Miter the bevel and miter answer book has useful tools as well such as: a six step guide on How to Cut Crown Molding using a Single Bevel Compound Miter Saw, a six step guide on How to Cut Crown Molding using a Double Bevel Compound Miter Saw, a six step guide on How to Cut Compound Miter Joints using a Single Bevel Compound Miter Saw, a six step guide on How to Cut Compound Miter Joints using a Double Bevel Compound Miter Saw along with a complete set of tables for Converting Decimals to Fractions Centimeters Millimeters and an equivalent Decimals to Tape-Measure table. 
Bevel Angle Settings and Miter Angle Settings for all Compound Miter Joints to use with all tools such as: Compound Miter Saw - Single Bevel Compound Miter Saw - Double Bevel Compound Miter Saw - Dual Bevel Compound Miter Saw - Sliding Compound Miter Saw - Single Bevel Sliding Compound Miter Saw - Double Bevel Sliding Compound Miter Saw - Dual-Bevel Sliding Compound Miter Saw - Table Saw - Hybrid Table Saw - Compact Job Site Table Saw - Portable Table Saw - Contractor's Table Saw - Professional Table Saw - Cabinet Table Saw - Benchtop Table Saw - Sliding Table Saw - Angle Router Bits - Angle Mounted Router - etc.